Quality Inspector

Our Offer for you

• Site: Fort McMurray, AB
• Schedule: Pre-turnaround schedule of 8 on, 6 off, 10 hours/day followed by turnaround schedule of 6 on, 1 off, 12 hours/day
• Accommodations: Camp accommodations provided
• Compensation: Competitive Wages, Overtime, DSP’s accepted
• Qualifications: CWB Level I or Level II, Journeyperson ticket in a mechanical trade, CSTS 20, H2S Alive, Confined Space Entry Monitor, Fall Protection

Why Work For Us:

Stuart Olson is searching for Quality Inspectors, Mechanical and Quality Lead, Mechanical with start dates ranging from mid-January through end of March 2024 at our client site in Fort McMurray. Working a pre-turnaround schedule of 8 on, 6 off, 10 hours/day followed by a turnaround schedule of 6 on, 1 off, 12 hours/day. Camp accommodations provided. Travel to site is not provided.

Responsibilities

• Ensure adherence to Stuart Olson’s Quality Management System.
• Prepare the Inspection and Test Plans (ITP’s) ensuring all quality control activities are identified, hold/witness points set and approvals obtained from the Client and AI as required.
• Review and release all technical documentation (drawings, specifications, etc.) for work execution.
• Prepare spool drawings for fabrication.
• Review and approve Material Requisitions.
• Perform receiving inspections of code materials, prefabricated spools and pressure vessels.
• Review and verify Material Test Reports (MTRs).
• Control of nonconforming materials.
• Verification of correct material release and traceability (identification) maintained throughout manufacture.
• Notify client and/or Authorized Inspector (AI) prior to start of work and for witness or hold points.
• Verify welder qualification record suitability for scope of work.
• Ensure control of welding consumables, included storage of low-hydrogen electrodes.
• Verify welding is being performed within the parameters of the accepted Welding Procedure Specification(s).
• Perform visual inspection of joint preparation, fit-up, in-process welding and completed weld for compliance with the WPS, client specifications and Code of Construction.
• Prepare Non-destructive Examination (NDE) requests and review NDE Reports.
• Prepare Post Weld Heat Treatment (PWHT) instructions and review final PWHT documentation to verify cycles meet or exceed the requirements of the applicable WPS(s).
• Prepare pressure testing packages, obtain client written approvals and witness pressure tests.
• Ensure that monitoring and measuring equipment (e.g. pressure test gauges, welding equipment, etc.) have been calibrated within the previous 12 months.
• Interface with the AI for vessel repair, alterations and ASME B31.1 BEP.
• Perform quality surveillances.
• Assist with the identification, control and resolution of nonconforming product and services.
• Participate in audits of the Quality Management System.
• Ensure compliance with client specifications and the applicable codes and standards.
• Ensure all inspections required by the PQP and ITPs are completed and documented appropriately.
• Prepare turnover documentation for Stuart Olson self-performed work and oversee the execution and quality of subcontractor ITP’s and turnover.
• Provide oversight on third party activities for hot tapping, coating and linings, machining, valve servicing and installing pressure enclosures.
• Ensuring employees / inspectors follow Company safety policies and procedures.

Qualifications

• High school diploma
• CWB Level 1 or 2 certification
• 3-5 years’ experience in the maintenance or construction industry
• Journeyman trade designation an asset
• E.T. in Welding Engineering Technology (WET) or Materials Engineering Technology (MET) an asset
• ASI 510, 570, 653 an asset
• CWB certified Welding Supervisor an asset
• NACE Coating Inspector certification an asset
• CSTS
• H2S Alive
• Confined Space
• Fall Arrest
• Sound knowledge of applicable Safety Code Acts, Regulations, Codes of Construction, standards, and specifications
• Experience working with regulatory authorities (TSBC, ABSA, TSASK, ITSM)
• Experience in industrial construction, maintenance and/or shutdowns
• Experienced in the use of the Bluebeam Revu and Microsoft Office Suite
• Ability to forge, grow and maintain positive relationships with multiple groups
• Strong written and oral communication skills
• Able to manage multiple priorities simultaneously and meet the time demands of unpredictable activities; capable of handling pressure and challenges in a dynamic business environment
• Ability to work within tight deadlines and prioritization of work to achieve them
• Strong analytical, critical thinking, problem-solving skills, and a high degree of accuracy and attention to detail
• Drug and Alcohol testing required
• Mask Fit testing may be required

Working Conditions

• Working both indoors and outdoors in hot weather conditions
• Working in and around noise and dust
• Camp is provided
• Travel is not provided
• Must be clean shaven
• Coveralls, safety glasses/goggles, hard hat and gloves are provided
• CSA approved steel-toed safety boots will be required

Physical Requirements

• Stand or walk for long periods of time
• Climbing stairs/ladders regularly
• Ability to lift loads up to 25kg
• Climbing stairs/ladders regularly
• Exposure to hazards such as heights, power tools, slips, falls, falling objects, and sharp hand tools

Who We Are

Stuart Olson has been positively impacting the businesses we serve, the communities in which we operate, and the lives we touch since 1911. Our rich history demonstrates our reach and diversity as an integrated, full service organization serving the commercial and industrial markets.

Specializing in Turnaround and Maintenance services in the Industrial sector, Stuart Olson has proudly served the Canadian construction industry for over 100 years. We deliver confidence through a client-centered approach that ensures the highest quality of service, reducing risk, and delivering results.

Only candidates being considered for an interview will be contacted directly.

Unsolicited resumes and phone inquiries from 3rd party agencies will not be accepted.

Reference JOB-1052

Company Stuart Olson

Job Type Full-time